1. Synchronized adjustment of backrest and seat inclination by one lever (fully synchronized adjustmen backrest and seat are adjustable depending)
2. One lever
3. Adjusting the tilt force of the backrest and seat
4. Locking in 5 positions
5. Mechanism can be used in either locked or unlocked position
6. Antishock
7. Seat inclination -3°/+10°, backrest inclination -2°/+21°
8. Automatic height adjustment of the backrest
The mechanism is acivated by moving the right lever forward. When the mechanism is releaed, apply pressure to the backrest with your back to achieve the desired angle of inclination. Then move the lever back to lock the mechanism and set the chair in a certain position. If the mechanism is not blocked it will be possible to rock freely on the chair.
An additional Anti-Shock system prevents the backrest from hitting a sittin person. To unlock the Anti-Shock system, press the back with your back and then lean forward.
Up & Down system – the backrest height is adjusted by pulling the backrest up to the required height. The backrest should stop the appropiate latch, to lower in the backres should be pulled all the way up, then lowered down and raised to the preferred height.
The mechanism allows you to adjust the resistance of the backrest and the seat. To adjust the chair to people with low body weight, unscrew the knob to the left. By tightening the knob to the right, the resistance of the backrest and seat increases, thanks to which the mechanism adapts to people with higher body weight.
1. Locking in 5 postisions
2. Seat depth adjustment in range of 50 mm
To move the seat forward or backward, pull the lever upwards under the seat with the backrest mechanism locked. Then, holding the lever, move the seat to the desired position and release the lever.